Description
PU stone: cast stone panels for counters and decorative surfaces
PU stone is a cast panel made from polyurethane resin combined with natural aggregates. It is designed to look like stone and to be handled like a panel: light enough to lift and fix without machinery, dense enough to take an impact, and waterproof through the material rather than only at the surface.
The usual application is a horizontal or vertical decorative surface — a dining table top, a bar counter, a reception desk front, a vanity — where a stone appearance is wanted without the weight and fixing complexity of a real slab. Cut-to-size supply means the panel arrives at the dimension the design needs rather than as a slab to be cut on site.
Technical specification
| Composition | Polyurethane resin with natural aggregates |
| Format | Cut-to-size panels to the project’s dimensions |
| Weight | Lightweight relative to stone; single-person handling for most panel sizes |
| Properties | Waterproof, impact resistant, stain resistant, easy to maintain |
| Application | Dining tables, countertops, decorative wall surfaces, vanity tops |
| Style | Modern; integrates with a range of interior schemes |
| Origin | Shouguang, Shandong, China |
Where PU stone is used
- Dining and café table tops, where a stone look is wanted on a base that can still be moved.
- Bar and reception counters — the front and top faces in a material that takes knocks.
- Vanity and bathroom counter tops, waterproof and stain resistant.
- Decorative wall panels and feature surfaces in hospitality interiors.
- Retail display surfaces, where the weight of stone would limit the fixture design.
What it solves, and what it does not
The problem PU stone solves is structural. A 20 mm stone top on a café table needs a steel frame and two people to move; the equivalent PU stone panel can be handled by one. On a raised floor, a mezzanine or a furniture item that has to be relocated, that difference decides whether the design is feasible.
What it does not do is behave like stone under heat. Polyurethane is a resin, and a hot pan straight from the hob will mark it in a way that granite would not. Trivets are not optional. It also has a lower scratch resistance than stone — a knife drawn across the surface leaves a line. For a surface that will genuinely be used as a prep area, a real stone or a compact laminate is the correct choice; for a table top that will be wiped and not cut on, PU stone performs.
Fabrication and installation
Panels are supplied cut to size, and edge details are formed at production rather than on site — a mitred or bullnose edge is easier to achieve in the factory than with a hand tool. Confirm the edge profile, thickness and any cut-outs for sinks or cable management at order stage.
Fixing depends on the substrate: adhesive to a solid carcass for vanity tops, mechanical fixing through a frame for counter fronts. Because the material is light, a bonded installation is usually adequate, but the substrate must be flat — a resilient panel over an uneven frame will rock. Seal joints and the junction with a wall or upstand; the material is waterproof but the joint is where water gets behind it.
Matching the rest of the interior
Where the scheme calls for a stone-look wall behind the counter, UV marble sheet gives a similar appearance in a much thinner wall lining. For a wood-effect surface in the same space, WPC wall panels and veneer faced block board cover the cladding and joinery side of the palette.
Ordering and delivery
Send dimensions for each panel, quantity, edge profile, cut-outs and destination port through the contact form. Standing MOQ is one 20GP container with 15–20 days production after deposit. Because panels are cut to size, allow time in the programme for the dimension schedule to be confirmed before production — a cut-to-size order cannot be adjusted after the line starts.
Frequently asked questions
Is PU stone real stone?
No. It is a polyurethane casting with natural aggregate, formed and finished to look like stone. It is lighter, warmer to the touch and less expensive than stone, and it does not have stone’s heat resistance.
Can it be used outdoors?
The material is waterproof, but UV exposure affects polyurethane over time and the colour may shift. For exterior work, a dedicated exterior panel is the safer specification.
Can it be cut on site?
It can be trimmed with standard woodworking tools, but the supplied cut-to-size format exists to avoid that. Site cutting exposes an edge that then needs finishing.
How does it compare with solid surface?
Solid surface is repairable — scratches can be sanded out and joints are invisible. PU stone is not designed for that level of rework. For a heavy-use commercial counter, solid surface is usually the better long-term choice.
Requesting a quotation
Send the panel schedule with dimensions, quantities, edge details and destination port through the contact form. The full wall panel range covers stone-effect, marble-effect and wood-effect surfaces.
Reviews
There are no reviews yet.